Instrumentarium SED VERSION HISTORY
© 2003-2006 Apteryx, Inc. All Rights Reserved.

Version 2.1 Build 44
Release Date: 5/11/07

  1. Made changes to better handle SmartNav support.

Version 2.1 Build 42
Release Date: 4/19/07

  1. Made changes to better handle Sigma M support.

Version 2.1 Build 41
Release Date: 4/18/07

  1. Added changes for new default values.
  2. Added option to assign default image values depending on what hardware is selected.

Version 2.1 Build 39
Release Date: 3/8/07

  1. Added support for new hardware.
  2. Maintenance build.

Version 2.1 Build 36
Release Date: 8/16/06

  1. Added support for the new OP200D and OC200D with SmartNav support.

Version 2.1 Build 34
Release Date: 7/27/06

  1. Added support for the new OP200D and OC200D product lines.
  2. Added DLL version checking to ensure proper DLL versions exist before image acquisition.

Version 2.1 Build 33
Release Date: 2/9/06

  1. Added capability to prevent prompting for tooth information for pan and ceph extensions. Requires version 3.9 b78 or later of XrayVision.

Version 2.1 Build 32
Release Date: 11/10/05

  1. Sensor system renamed to Instrumentarium.

Version 2.1 Build 31
Release Date: 9/26/05

  1. Added support for the Sigma multiplexer.

Version 2.1 Build 30
Release Date: 9/13/05

  1. New default BCG settings added.
  2. Corrected problem where both high detail and high contrast options could be selected at the same time.

Version 2.1 Build 29
Release Date: 6/3/05

  1. Added functionality to copy calibration images to the clipboard. This feature can be used to copy a calibration image into a patient's record.

Version 2.1 Build 28
Release Date: 6/2/05

  1. Added functionality to permit the various extensions to identify the sub-class of an image (e.g. PA, Pan, Ceph).

Version 2.1 Build 27
Release Date: 3/7/05

  1. Corrected issue with sharpen option being remembered for the Sigma system.

Version 2.1 Build 26
Release Date: 3/4/05

  1. Added support for GE Healthcare naming of sensor systems.
  2. Update GE graphics.

Version 2.1 Build 24
Release Date: 10/28/04

  1. Corrected issues with adding new gain files.
  2. Added support for new sensor types.

Version 2.1 Build 17
Release Date: 7/27/04

  1. Added option to permit user to select either the PX or CR modality for the OPD system.

Version 2.1 Build 16
Release Date: 6/29/04

  1. Internal improvements made to functionality and image improvement.

Version 2.1 Build 12
Release Date: 2/4/04

  1. Additional DICOM information support added. Please note that you will need to additionally update the DICOM.DLL and main application before the additional DICOM information will be available.

Version 2.1 Build 11
Release Date: 12/22/03

  1. Made a change so that the cut corners are no longer filled on the Size 1 sensor (which actually does not have cut corners).

Version 2.1 Build 10
Release Date: 12/10/03

  1. Maintenance release: Window's font is now used for various controls in the interface; extended character sets now available for a wider range of supported languages; new more efficient versions of interface controls added.
  2. New image algorithms.

Version 2.0 Build 10
Release Date: 7/15/03

  1. Undetermined image orientation change corrected in Sigma sensors.

Version 2.0 Build 9
Release Date: 6/26/03

  1. Reduced images no longer have the footer warning text. The reduction factor option has been password protected.

Version 2.0 Build 7
Release Date: 6/2/03

  1. "Image quality" part of footnote removed when the user select one of the image reduction options..

Version 2.0 Build 5
Release Date: 5/15/03

  1. Instrumentarium SIGMA, OPD and OCD support separated into three separate components. This separation makes utilization of different types of hardware attached to the same system easier to use.
  2. New imaging algorithms implemented for each of the three systems resulting in improved image quality. "High definition" and "high contrast" settings added for the OPD and OCD systems.
  3. New diagnostic implemented to determine if the hardware is returning a blank image.
  4. Several internal changes made to ensure cross-compatibility between the three extensions and the up-in-coming TWAIN controller.

Version 1.0 Build 69
Release Date: 4/30/03

  1. Added reduced image support.

Version 1.0 Build 68
Release Date: 4/4/03

  1. Added new 1.2 ICM toolkit from Instrumentarium.
  2. Added sensor hot swapping support.

Version 1.0 Build 66
Release Date: 3/19/03

  1. Implemented new algorithms to improve image quality.
  2. Several internal changes implemented.

Version 1.0 Build 60
Release Date: 3/3/03

  1. Added system information feature to sensor options and capture dialog.
  2. Change the way Battery refresh is initiated from the sensor options.

Version 1.0 Build 58
Release Date: 1/14/03

  1. Change made to remove extra "Sensor Ready" signals when capturing images.

Version 1.0 Build 57
Release Date: 12/20/02

  1. Change had to be made to make the product backwards compatible with previous Pan and Ceph machines.

Version 1.0 Build 56
Release Date: 12/12/02

  1. Added new support for the new firmware and hardware.
  2. Change the way the hardware is initialized and shutdown.  Facilitates improved usage of the hardware.

Version 1.0 Build 54
Release Date: 12/11/02

  1. Added simulation image related notes.

Version 1.0 Build 53
Release Date: 10/6/02

  1. New toolkit from Instrumentarium integrated into the extension.

Version 1.0 Build 52
Release Date: 10/5/02

  1. Change made to the DPI settings of images returned by the hardware.

Version 1.0 Build 51
Release Date: 9/30/02

  1. Change made to the DPI settings of both simulated and real images returned from the extension.

Version 1.0 Build 50
Release Date: 9/29/02

  1. Added a default image calibration option.

Version 1.0 Build 49
Release Date: 9/24/02

  1. Added a message when in simulation mode.  This warning helps clean up Window's issues when loading a DLL that does not immediately load its own resources.

Version 1.0 Build 48
Release Date: 8/30/02

  1. Resolution information changed for the Sigma images.

Version 1.0 Build 47
Release Date: 8/28/02

  1. Resolution information changed for returned images.

Version 1.0 Build 46
Release Date: 8/25/02

  1. Added support for the application to automatically create the target directories.

Version 1.0 Build 45
Release Date: 8/22/02

  1. Added better support for importing gain files.

Version 1.0 Build 44
Release Date: 8/20/02

  1. Added handling for read-only file attributes on required files.

Version 1.0 Build 42
Release Date: 8/14/02

  1. Added simulation capabilities to the x-ray extension.

Version 1.0 Build 40
Release Date: 7/3/02

  1. Made significant changes to the image quality coming from the various imaging hardware.
  2. Corrections made to the image orientation when capturing into a layout with the Sigma product.
  3. Reorientation changes made when changing the tile during a layout capture.

Version 1.0 Build 29
Release Date: 5/17/02

  1. Changes made to the orientation of the Sigma images.

Version 1.0 Build 27
Release Date: 4/24/02

  1. Modified the extension to black out both corners of the image.
  2. Corrected some orientation issues.

Version 1.0 Build 24
Release Date: 4/23/02

  1. Added support for the new image orientation support in the manufacturer supplied DLLs.

Version 1.0 Build 23
Release Date: 4/17/02

  1. Added real-time capture display.

Version 1.0 Build 22
Release Date: 3/28/02

  1. Added option of aborting hardware when capturing images.
  2. Now defaults to Sigma and Panoramic machine instead of just Sigma.
 

©2001-2008 Apteryx, Inc. • 313 S High St. Suite 200 • Akron, Ohio 44308 USA • 330-376-0889
Legal notices | Privacy Policy | Questions, comments, or concerns?