Suni SED VERSION HISTORY
© 2003-2008 Apteryx, Inc.
All Rights Reserved.
Version 5.0 Build 25
Release Date: 6/25/08
- Updated sensor resolutions.
Version 5.0 Build 20
Release Date: 1/24/07
- Added sharpening filter.
Version 5.0 Build 18
Release Date: 6/23/06
- Made a small change in image processing in order to ignore a small border
around the image when determining the optimal brightness/contrast around
an image.
- Maintenance build.
Version 5.0 Build 16
Release Date: 6/8/05
- Maintenance release.
Version 5.0 Build 14
Release Date: 12/13/04
- Changes made to handle power problems with the 1800 that could result in
a software crash.
Version 5.0 Build 11
Release Date: 2/17/04
- Internal changes made to hardware handling.
Version 5.0 Build 8
Release Date: 2/9/04
- Changes made to be sure that detection of other Suni hardware is not falsely
interpreted as Suni digital x-ray hardware.
Version 5.0 Build 6
Release Date: 2/4/04
- Additional DICOM information support added. Please note that you will need
to additionally update the DICOM.DLL and main application before the additional
DICOM information will be available.
Version 5.0 Build 3
Release Date: 1/12/04
- Separate smoothing factors for standard and binned images.
- Image return type defaulted to standard.
Version 5.0 Build 2
Release Date: 12/31/03
- Support for additional hardware types.
- Support for automatic firmware selection.
- SED options updated.
- Password protection removed on some of the option pages.
Version 4.0 Build 26
Release Date: 12/15/03
- Correction made to correct multiple image capture problems..
Version 4.0 Build 25
Release Date: 12/10/03
- Maintenance release: Window's font is now used for various controls in
the interface; extended character sets now available for a wider range of
supported languages; new more efficient versions of interface controls added.
- Internal firmware handling changes.
Version 4.0 Build 23
Release Date: 7/8/03
- Made correction to binned flaw correction to correct for floor binning
function.
Version 4.0 Build 22
Release Date: 6/17/03
- Changed flaw corrections on systems utilizing binning firmware.
Version 4.0 Build 21
Release Date: 5/16/03
- Added ability to add sensor configurations from drives and locations other
than a floppy diskette.
Version 4.0 Build 19
Release Date: 3/11/03
- Added additional support for handling when more than 3 firmware releases
are available at the same time.
Version 4.0 Build 18
Release Date: 12/13/02
- Made power handling
corrections based on the selected firmware.
Version 4.0 Build 17
Release Date: 12/12/02
- Changed the "low
power checking" option to default to enabled.
- Changed the image width
used when capturing from BINNED firmware.
- Added previous firmware
option for original Suni hardware.
Version 4.0 Build 16
Release Date: 12/10/02
- Added default support
for Suni's new firmware filenames.
Version 4.0 Build 16
Release Date: 12/8/02
- Added support for a
wider range of firmware.
Version 4.0 Build 14
Release Date: 9/29/02
- Added a default image
calibration option.
Version 4.0 Build 11
Release Date: 5/15/02
- New options added to
the MPDx options.
- Changes made to support
new Suni Firmware and new hardware models.
Version 4.0 Build 6
Release Date: 4/23/02
- Added better support
for selecting different types of firmware.
- Added support for the
USB-1600 model of the Suni hardware.
Version 4.0 Build 4
Release Date: 3/28/02
- Changed the default
B/C and gamma settings for freshly installed systems.
Version 4.0 Build 3
Release Date: 3/14/01
- Additional flush time
options added to adjust the amount of time required to prepare sensor
captures
Version 4.0 Build 2
Release Date: 3/3/01
- Added thorough median
filter
Version 4.0 Build 1
Release Date: 2/7/01
- Modified to conform
to new XVa3 3.5 specs
Version 3.0 Build 15
Release Date: 5/28/00
- Additional improvements
to image processing, handling and options.
- Automatic orientation
corrected on teeth #5, 21, 21 and 28.
Version 3.0 Build 14
Release Date: 5/2/00
- Large improvements to image processing and handling.
Version 3.0 Build 11
Release Date: 4/16/00
- Additional B/C user
specified application support
- Improved support for
handling errors after x-ray exposure
- Support for preventing
white burnout in image
Version 3.0 Build 9
Release Date: 3/19/00
- Image reorientation
support added
- MPDx image calibration
improved
Version 3.0 Build 8
Release Date: 2/13/00
- Change made to "Processing ..." display
to accommodate lag on some systems
Version 3.0 Build 7
Release Date: 1/1/00
- Confirmation message
added when a new sensor is added
- "Processing"
message displayed immediately after x-ray is triggered
- Fix: "User canceled"
message displayed when board times out
- Raw sensor image import
remembers last settings
- Fix: Blank error message
returned when user cancels various functions
- New features added to
report the current sensor port
- Fix: MCS file not automatically
being found until entering options
Version 3.0 Build 6
Release Date: 12/20/99
- Compiled to conform to new application interface
standard
Version 2.0 Build 14
Release Date: 11/11/99
- Battery/External power
setting added to options
- "Don't display
this message again" functionality
- When background capture
times out on a battery powered system, background capturing is suspended
so that the battery can recharge
- Development dialog that
is displayed while in background capture was removed
- Automatic selection
of a sensor the first time the software is run
- Background capture and
battery powered unit warnings added.